Ninja Air Fryer Won’t Turn On


Ninja Air Fryer Won't Turn On

You’re not alone if your Ninja Air Fryer won’t turn on because several others have experienced the same. A ninja air fryer is a small appliance that uses little or no oil to fry food, making it a healthier alternative to traditional deep fryers.

This blog post will review some of the most common reasons your Ninja air fryer won’t turn on. We will also provide you with some solutions to fix the problem, and hopefully, your air fryer will be up and running again.

8 Reasons Why Ninja Air Fryer Won’t Turn On

1. Faulty Power Connection

Ensure the power cord is plugged into the wall outlet and the air fryer. If it is, check for loose wires or damage to the cord and replace it if damaged. 

2. Blown Fuse

If the air fryer is plugged into a power strip, check to see if the strip has a blown fuse and if so, replace the fuse and try again.

3. Broken Down Air Fryer 

If the air fryer is more than a few years old, it may be broken down and need a replacement. Usually, the heating element will burn out when the appliance ages or other components fail.

4. Overloaded Basket

If the basket is overloaded with food, it can cause the air fryer to trip its overheat protection switch. Please reset it if the air fryer protection switch is tripped and see if that works. 

5. Stuck Controls  

If the control panel is not working, it could be because the buttons are jammed or stuck, so try pressing each button a few times to see if that will solve the problem. If the control panel is still not working, you should replace it.

6. Bad Connection On The Socket

The socket that the air fryer plugs into could be loose, dirty, or damaged. Inspect the socket and clean it out if necessary.

7. Damaged Micro Switch

The micro switch is a safety device that prevents the air fryer from turning on if the basket is not in place. If this switch is damaged, the air fryer will not turn on, so you’ll need to replace the micro switch.

8. Air Fryer Hasn’t Been Pre-heated

If the air fryer hasn’t been pre-heated, it will not turn on. So it is important that you pre-heat the air fryer according to the manufacturer’s instructions before trying to use it.

Recommended Product: Ninja FG551 Foodi Smart XL

Ninja Air Fryer Won't Turn On

How to Fix Ninja Air Fryer That Won’t Turn On 

1. Reset and Reboot

If your Ninja Air Fryer still won’t turn on after trying the above, you may need to reset and reboot the appliance. To do this, unplug the air fryer from the wall outlet and wait for 30 seconds. Then, plug it back in and try turning it on again.

2. Ensure the Air Fryer is Plugged In 

The first thing you should do if your Ninja air fryer won’t turn on is to ensure that it’s plugged in. Check the power cord to ensure it’s securely plugged into the air fryer and the wall outlet. If it is, check for loose wires or damage to the cord. If the power cord is damaged, it will need to be replaced. 

3. Ensure the Air Fryer is Connected to a Functioning Socket

The socket that the air fryer plugs into could be loose, dirty, or damaged. Inspect the socket and clean it out if necessary. If the socket is damaged, you will need to have it replaced by a professional.

4. Ensure Your Timer is Correctly Set

If the timer is not set, the air fryer will not turn on, so you must ensure it is set correctly at all times before you start cooking.

5. Position the Air Fryer Properly

Ensure that the air fryer is not touching any walls or other surfaces; it should be on a flat surface.

6. Replace Blow Fuse

If the air fryer is plugged into a power strip, check to see if the strip has a blown fuse. If so, replace the Fuse and try again.

7. Reach Out to the manufacturer

If you’ve tried everything and your Ninja air fryer still won’t turn on, reach out to the manufacturer. They may be able to help you troubleshoot the problem or send you a replacement part.

Why My Ninja Air Fryer Is Not Working?

1. Badly Installed Air Fryer Basket

You must install the air fryer basket correctly for the appliance to work properly. If the basket is not installed correctly, it can cause the air fryer to trip its overheat protection switch. This switch will need to be reset for the appliance to work again.

2. Air Fryer Not Heating Up

If the air fryer is not heating up, it could be because the basket is not installed correctly. You must install the basket correctly for the appliance to work properly. 

If the basket is not installed correctly, it can cause the air fryer to trip its overheat protection switch. This switch will need to be reset for the appliance to work again. 

3. Broken Controls

If the controls on the air fryer are not working, it could be because they are broken — in this case, the air fryer will need to be replaced.

4. Standby Mode 

Some air fryer models have a standby mode, which you need to deactivate for the appliance to work again.

5. Overloaded Air Fryer Basket

If the air fryer basket is overloaded, it can cause the appliance to trip its overheat protection switch. This switch will need to be reset for the appliance to work again.

6. Engaged Timer

The air fryer will not turn on if the timer is engaged, so you’ll need to disengage the timer for the appliance to work.

7. Loosely Connected Power Cord 

If the power cord is not connected correctly, it can cause the air fryer to trip its overheat protection switch. So you should connect the power cord correctly for the appliance to work for any loosely connected power cord. 

8. Damaged/Faulty Air Fryer 

If the air fryer is damaged or faulty, it must be replaced.

9. Power Loss From The Main Meter

A power loss from the main meter can cause the air fryer to trip its overheat protection switch.

Recommended Product: Ninja AF161 Max XL Air Fryer

Ninja Air Fryer Won't Turn On

How Do You Turn On The Ninja Foodi Air Fryer?

To turn on your Ninja Foodi Air Fryer, ensure that the power switch is in the “On” position and that the unit is plugged into a working outlet. Once these two things have been verified, press the “Start/Stop” button. 

The display will show “–:–” and begin counting down from 60 minutes. At this time, you can either set your desired cook time or leave it at the default 60 minutes. Once your cook time has been set, press the “Start/Stop” button to begin cooking.

If you need to cancel or pause cooking at any time, press the “Start/Stop” button once because pressing the button again will resume cooking. The air fryer will automatically shut off when your food is finished cooking.

Why Is My Ninja Foodi Not Pressurizing?

1. The Gasket Seals: 

If your Ninja Foodi won’t pressurize, it could be because the gasket seals are damaged or not correctly installed. If the gasket seals are not correctly installed, they will not create a tight seal, which is necessary for the Ninja Foodi to pressurize. To check if the gasket seals are properly installed, follow these steps:

  • Remove the lid from the Ninja Foodi.
  • Locate the Gasket seals. There are two of them; one on the lid and one on the base.
  • Inspect the gasket seals for any damage. If they are damaged, you’ll need to replace them.
  • Ensure the gasket seals are correctly installed — they should be snug and not too loose or tight.

2. Liquid Content:

Your Ninja Foodi might not be pressurizing because there isn’t enough liquid content in the pot. The Ninja Foodi needs a minimum of two cups of liquid to pressurize. If there are less than two cups of liquid in the pot, add more until you reach the minimum amount.

3. Release Knob: 

The release knob might be set to “vent” instead of “seal,” so make sure the release knob is in the “seal” position.

4. Wrong Ingredients: 

You might be using ingredients preventing the Ninja Foodi from pressuring. Some examples of these ingredients are dried beans, raw rice, dried pasta nuts, and seeds. 

These ingredients can absorb liquid and prevent the Ninja Foodi from pressurizing. If you’re unsure if an ingredient will prevent the Ninja Foodi from pressurizing, consult a recipe or cookbook specifically for the Ninja Foodi.

Frequently Asked Questions 

How Long Does it Take a Ninja Air Fryer to Preheat?

The appliance takes about three minutes to reach the desired cooking temperature. However, the time may vary depending on the specific model of an air fryer.

What is the Best Way to Clean My Ninja Air Fryer?

The best way to clean the Ninja air fryer is to use the manual that came with the appliance. If you don’t have the manual, you can find cleaning instructions on the Ninja website. 

To clean your Ninja air fryer, remove the parts from the appliance and wash them in warm, soapy water. Rinse the parts well and dry them before putting them back in the air fryer.

You should also deep clean your Ninja air fryer every few months. To do this, unplug the appliance and remove all the removable parts. Wash these parts in warm, soapy water and rinse them well. Then, clean the inside of the air fryer with a damp cloth. Ensure the air fryer is entirely dry before using. 

Denzil Otieno

Denzil is a freelance content marketer with an eye for detail and a knack for making even the driest of topics interesting. He's worked with some of the biggest brands in the world, but he's not one to rest on his laurels - he's always looking for new challenges and ways to improve his skills. In his spare time, Denzil enjoys reading (especially anything by Terry Pratchett), watching films (he has a soft spot for 80s action movies) and spending time with his wife and two cats.

Recent Posts