Instant Pot Float Valve Fell Out


Instant Pot Float Valve Fell Out

Instant Pot users have reported that their Instant Pot float valve fell out, but why did it fall out? This problem has left instant pot users wondering whether they are mishandling their instant pots or if it’s a manufacturing defect. 

If you have experienced this issue, you are not alone — many people have had the same problem, but the good news is that there is an easy fix.

If you have never experienced this issue, you may wonder what the float valve is and why it is important. This blog post will explore what could be causing the float valve to fall out and provide some solutions to help keep your Instant Pot running smoothly.

Instant Pot Terminology: The Parts 

1. Float Valve

The float valve is located on the underside of the lid and is used to release the pressure from the pot.

2. Inner Pot

The inner pot is where all the food goes; made of stainless steel and has a non-stick coating. The inner pot also has a hole in the bottom, which is where the float valve fits.

3. Steam Release Handle

The steam release handle is located on the top of the lid and is used to release the steam from the pot.

4. Instant Pot Lid

The Instant Pot lid is made of stainless steel and has a clear plastic window to check on the food while cooking.

5. The Power Cord

The power cord is located at the back of the pot and is used to plug the pot into an outlet.

6. Anti-Block Shield

The anti-block shield is located on the underside of the lid to prevent food from blocking the steam release hole.

7. Condensation Collector

The condensation collector is located at the back of the pot to collect the water that condenses on the lid during cooking.

8. Sealing Rings

The two sealing rings (a black one and a clear one) are on the lid inside. The black one is silicone, creating a seal between the pot and the lid, while the clear one is made of rubber, and it is there to help with pressure release.

9. Instant Pot Base

The Instant Pot base is made of plastic and has a stainless steel inner pot used to cook food.

Instant Pot Float Valve Fell Out: What to Do 

If the float valve falls out of the pot, it is important to check the seals and ensure they are in place. If the seals are not in place, the pot will not be able to build pressure, and the food will not cook. 

To check the seals, unscrew the lid and remove the inner pot. Inspect the seals and make sure that they are not damaged and if they are, replace them with new ones. 

Once the seals are in place, screw the lid back on and try to build pressure again. If the pot will not build pressure, it is important to contact Instant Pot customer service for further assistance.

Recommended Product: Instant Pot 7-in-1 Electric Pressure Cooker

Instant Pot Float Valve Fell Out

Can An Instant Pot Valve Fall Out?

Yes, the float valve in your Instant Pot can fall out. This is not a common occurrence, but it does happen from time to time. If your float valve falls out, don’t panic — you can quickly fix it by following these simple steps:

First, ensure the power is switched off, and the pot is unplugged, then remove the lid and find the float valve. The float valve is a small white plastic piece that is located on the inside of the lid.

Once you have found the float valve, push it back into place and ensure it is pushed in to flush with the lid. Once the float valve is back in place, you can put the lid back on and plug the pot back in.

What Causes An Instant Pot Valve To Fall Out?

1. Silicone Cap Is Stuck

If the silicone cap on your Instant Pot is stuck, it can cause the valve to fall out. To fix this, remove the cap and clean the area around the valve.

2. Silicone Cap Is Old

If the silicone cap is old, it may be hard to remove — in this case; you may need to replace the valve.

3. Pin Becomes Misshapen

The pin that holds the valve in place can become misshapen over time, and this can cause the valve to fall out — if this happens, you’ll need to replace the valve.

4. The Float Valve Was Poorly Replaced

If the float valve was poorly replaced, it might not be seated correctly, which will most likely cause the valve to fall out. If this happens, you’ll need to replace the valve.

How Can I Fix An Instant Pot Valve That Has Fallen Out?

1. Clean The Valve

If your valve is clean, it will be easier to get it back in and seal correctly. Use a cotton swab or toothpick to remove any dirt or food particles on the valve.

2. Replace The Valve

If the valve is damaged, you will need to replace it. You can find replacement valves at most hardware stores.

3. Ensure The Valve Is Properly Assembled

Before you put the valve back in, ensure it is correctly assembled. The O-ring should be in place, and the valve should be tight. If the valve is not properly assembled, it will not seal correctly.

Can I Get A Replacement Instant Pot Valve?

Yes, you can get a replacement valve for your Instant Pot either from the Instant Pot website or Amazon.com. If you have an older model Instant Pot, you may also need to purchase a new sealing ring.

When replacing the valve, ensure that the arrow on the valve points in the correct direction. If the arrow is pointing to the left, it is installed correctly, and if the arrow points to the right, it is installed incorrectly and needs to be turned around.

Once you have replaced the valve, please test it by: 

  • Add water to the pot and place it on the stovetop. 
  • Bring the water to a boil and then turn off the heat. 
  • Allow the pot to sit for about 15 minutes. 
  • After 15 minutes, open the pot and check to see if the water has been released. 
  • If it has, then your Instant Pot is working correctly again.

Recommended Product: Release Handle Steam Valve

Instant Pot Float Valve Fell Out

Can I Still Use My Instant Pot If The Valve Falls Out?

You cannot use your Instant Pot if the valve falls out because the valve is an important safety feature that prevents the pressure from building up too high and exploding. If the valve falls out, the gasket will likely come off, so the pressure cooker would need to be replaced.

If you have an Instant Pot with a missing or damaged valve, we recommend that you contact the manufacturer for a replacement. Do not attempt to use your pressure cooker without a functioning valve.

Frequently Asked Questions 

Can I Use My Instant Pot Without The Release Valve?

No, the release valve is a critical part of the Instant Pot, which allows the pressure to build up inside the pot and releases it when you want to open it. In short, your Instant Pot will not work without the release valve. 

Can I Use My Instant Pot Without The Bobber Valve?

No, you cannot because your Instant Pot will not be able to build up enough pressure to cook food properly. If your Instant Pot doesn’t have a Bobber Valve, you should contact the Instant Pot company to get a replacement. 

How Do You Put A Float Valve Back On An Instant Pot?

Putting a float valve back on an instant pot is not difficult — below are the steps:

  • Remove the inner pot from the Instant Pot: Unplug the Instant Pot and remove the inner pot while being careful not to get burnt because the pot will be hot.
  • Determine which way the float valve goes: The float valve has a small tab on one side, which should face up when you put the float valve back on the Instant Pot.
  • Put the float valve back on: Place the float valve over the hole on the Instant Pot and make sure that the tab is facing up.
  • Put the inner pot back in: Place the inner pot back in the Instant Pot and ensure the float valve is still in the correct position.
  • Plug the Instant Pot back in, and the float valve should work correctly.

What Does A Float Valve Look Like?

If you have an Instant Pot, you may have noticed a small white plastic piece inside the lid — this is the float valve, which plays an essential role in pressure cooking.

The float valve is there to help regulate the pressure inside the pot. When the pot is pressurized, the float valve rises and seals the opening in the lid. This prevents more pressure from building up and keeps the pot’s contents from boiling.

Should The Float Valve Be Up Or Down When Cooking?

The float valve is designed to be in the down position when cooking. This is because the pressure cooker needs to build up pressure before the float valve engages and allows the pressure to release. If the float valve is up, it can prevent the pressure cooker from building up enough pressure to cook correctly.

Conclusion — Instant Pot Float Valve Fell Out

In conclusion, checking your Instant Pot regularly is important to ensure all the parts are in working order. If you notice that the float valve has fallen out, put it back in and screw it tight to ensure that your Instant Pot works properly and doesn’t cause any safety issues.

Denzil Otieno

Denzil is a freelance content marketer with an eye for detail and a knack for making even the driest of topics interesting. He's worked with some of the biggest brands in the world, but he's not one to rest on his laurels - he's always looking for new challenges and ways to improve his skills. In his spare time, Denzil enjoys reading (especially anything by Terry Pratchett), watching films (he has a soft spot for 80s action movies) and spending time with his wife and two cats.

Recent Posts